Trying to keep up from home.
My project is a Tipi / Skirt with a rotating video projection that will circulate the perimeter of the Tipi. The idea is that the video (a figure) will be moving and the moving figure will make a circuit around the perimeter of the garment. Ideally, I’d like to even upgrade this to have it triggered by a motion detection device so it activates when you’re in range.
Non-negotiables:
Projection inside (rear projection)
Projection rotates
Loop initiated by motion
Even more bonus elements:
whole thing would be wired to turn on / off (power) by motion sensor so I don’t burn the projector out in the course of exhibiting the piece.
Here’s a link to an old blog of mine with an earlier piece (see kangaroo at bottom of blog) Video clip to right projects inside pouch.