(Archive of : http://www.thing-a-day2.com/2008/02/14/day-14-thing-14-remote-arduino-programmer-failed/)
I have been so happy with the programmer that I have been using that I wanted to add this capability to the xbee rf modules that I built a few months ago. I wired dio0 to both send and recieve boards and put the cap on the output side and wired up a reset.
Then I figured out that the data passing would require updating the flash on both boards and that that required a windows based PC. (LARGE PILE OF EXPLICITIVES REMOVED HERE) I moved the passthrough to the rts/cts pairs which the old firmware is supposed to support met NOOOOO!
If I built it but it doesn’t work yet did I make a thing?
UPDATE: 25feb08 I found an old ob900 (I have like 15 old omnibooks in various states of running) that was running W2k and upgraded the firmware on both radios. I will test them out after I have had some sleep.